Let your garden path have a beautiful pattern so that the road is no longer rigid!
DIY Path Floor Mould Maker fulfills your dream of decorating your own pathway & garden!
You can make a cement garden path in flawless patterns, smooth surface & even filling with these molds. Everything can be easily done - Just fill the mold with concrete, smooth surface, and remove mold and you're done!
DIY Path Floor Mould Maker is a paving mold used to make a cement (or red mud) garden path. Let your garden path have a beautiful patternso that the road is no longer rigid.
Durable Material: It is a reusable plastic mold for creating patterned walks, path, patios, sturdy and durable.
Suitable for gardens, meadows, balconies, villas and more.
Easy to Use: No special skills required. Just put the cement into the mold.
It can be used repeatedlyor multiple times at the same time until all the roads have been completed.
Easy to Clean:Just take out the mold before the concrete is solidified and clean it with water, it can be reused next time.
It is possibleto make roads of different colors, and it is only necessary to blend the cement inside into colored, without expensive equipment and laying costs.Save money, convenience, beauty, and practicality.
DIY Your Garden NOW!:This mold is designed for the garden-lovers, who want to create their own design decoration to make their gardens more beautiful. To give your pavement and yards some artistic sense.
HOW TO USE TO BUILD THE PATHWAYS
Step 1: Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2: Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
Step 3: Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4: Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5: Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway.
Step 6: After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle.
A: 30 x 30 CM
B: 40 x 40 CM
C: 36 x 36 CM
1 x Path Floor Mould
NOT SOLD IN STORES!
ADD TO CART NOW for 50% OFF
Please note that Shipping Time will take approximately 3-4 weeks.
How long will order processing take?
Orders typically take up to 7 days to process before they ship – excluding weekends and holidays. During the holidays, processing times may take up to 14 days. You will receive an email confirming your purchase with the shipping tracking number when your order is shipped out.
How long will it take for me to receive my item?
US orders will be shipped via USPS. Shipping methods for international orders will vary based on the shipping address provided.
Transit time to the US: 5-20 business days Transit time to international: 10-45 business days
An order takes 3 weeks on average to ship.
There are circumstances that are out of control (natural disasters, holidays, weather, etc) that may cause shipping postponements. While most packages will arrive on time, there may be circumstances and delays that our carriers may experience. For this reason, we do not guarantee the exact delivery time; delivery issue is the responsibility of the shipping company.
Please note that Shipping Time will take approximately 3-4 weeks.
What is your return policy like? We'd like to think that every customer leaves a happy customer (and we have good reason to!) but in the event that you don't, we offer 30 day money-back guarantee, no questions asked! Just our way of saying thank you for your trust!
Mi camino ha sido devastado debido a estas guerras narco en nuestro país ... esto me ayudó a reconstruir mi camino y ahora es mucho mejor
Me encanta, funcionó muy bien para mi jardín.
It turned out great, was easy to use. We list the directions so we missed the step of smoothing it with a wet sponge, but it still looks great. If had to do different, we would have rented a cement mixer. Used 18, 80lb bags of concrete and mixed by hand.
It is great mold and easy to use. I am so surprised that this walk maker helped me save a lot of time.
I love this stone walkway mold. I have been using it for over 25 years. It is so simple to use. Each side has either an "out" or "in" pattern. Simply match your next section so it interlocks.
Turn your pattern 1/4 turn each time to achieve a more random look.
Curves are simply made by aligning the mold to the last poured section, pressing the mold down, remove mold, and remove excess concrete.
To make sure these look like random stones, use a trowel to smooth out the sharp edges.
I have used both soil and gray-colored mortar to fill in the spaces between the 'stones'.
This awesome tool is exactly what i need for my garden diy road construction work, durable pavement mold, easy to use, you can build a wonderful garden road by yourself in a short time, a must for garden DIY lovers
I bought these in 2 weeks ago of this year to make a walkway from my back porch to back fence gate. I finally was able to get to it this past weekend, after finishing my new fence. I really wanted a concrete walkway, as I can never get grass to grow by my gate to the ally. It also made for a nice mud hole after a good rain or snow. I definitely didn't want cheap pavers, so I thought a walkway using these would be perfect. I will definitely use these again. I'm sure I'll come up with another use for this year, tips - make sure your ground is level using the forms. If all 4 sides of the form are not touching the ground, fix it. Concrete will spill out if you are not careful. I had that happen a couple of times.
I love how it turned out for my walk way! Great mould!
Took almost 3 weeks to arrive in Canada. There was an issue with the delivery due to holidays but I'm thankful that I got it today. Haven't use it yet but seems durable and well-made.
Great size and easy to use. Making a pathway from our driveway to the house and it couldn't be easier. Ordered 2 more (total of 3) to make the work go faster. Btw an 80lb bag fills the mold 3 times perfectly. We let the concrete set for about 8 minutes before we lifted it when it looked dryish on top and moved to the next. We were able to use the whole bag before it set doing it this way using quickcrete. I was able to do the whole job with a baby attached to my back.
The support was very responsive and professional and handled my concern so well. It was my 3rd purchase from this store and they never failed me. Thank you!
I searched for hours looking for a perfect item to replace some current pavers when I came across this Mold. I purchased two of Epolygon Pattern and got right to work when I got them. After 6 hours I was all done with the area (16 sets) and can’t express how easy and improved this look is. When setting the stone I rotated each frame once so no identical stones set next to each other. I chose not to add color to the concrete mix for now and will go back over it with concrete dye once it’s cured. I purchased 2 frames to help the progress and in case one broke but luckily it didn’t. I highly recommend and will be using these again in the near future.